 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 95939 IRF7233PBF HEXFET(R) Power MOSFET l l l l l Ultra Low On-Resistance P-Channel MOSFET Surface Mount Available in Tape & Reel Lead-Free S 1 2 3 4 8 7 A D D D D S S G VDSS = -12V RDS(on) = 0.020 6 5 Description These P-Channel MOSFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit provides the designer with an extremely efficient device for use in battery and load management applications. The SO-8 has been modified through a customized leadframe for enhanced thermal characteristics and multiple-die capability making it ideal in a variety of power applications. With these improvements, multiple devices can be used in an application with dramatically reduced board space. The package is designed for vapor phase, infrared, or wave soldering techniques. Top View SO-8 Absolute Maximum Ratings Parameter VDS ID @ TA = 25C ID @ TA= 70C IDM PD @TA = 25C PD @TA = 70C EAS VGS TJ, TSTG Drain- Source Voltage Continuous Drain Current, VGS @ -4.5V Continuous Drain Current, VGS @ -4.5V Pulsed Drain Current Power Dissipation Power Dissipation Linear Derating Factor Single Pulse Avalanche Energy Gate-to-Source Voltage Junction and Storage Temperature Range Max. -12 9.5 6.0 76 2.5 1.6 0.02 60 12 -55 to + 150 Units V A W W/C mJ V C Thermal Resistance Parameter RJA Maximum Junction-to-Ambient Max. 50 Units C/W www.irf.com 1 11/9/04 IRF7233PBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS V(BR)DSS V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance RDS(on) VGS(th) gfs IDSS I GSS Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Min. -14 -12 --- --- -0.6 3.3 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. Max. Units Conditions --- --- V VGS = 0V, ID = -5.0mA --- --- V VGS = 0V, ID = -250A 0.001 --- V/C Reference to 25C, ID = -1mA 0.013 0.020 VGS = -4.5V, ID = -9.5A 0.023 0.033 VGS = -2.5V, ID = -6.0A --- --- V VDS = VGS, ID = -250A --- --- S VDS = -10V, ID = -9.5A --- -10 VDS = -12V, VGS = 0V --- -1.0 VDS = -9.6V, VGS = 0V A --- -100 VDS = -12V, VGS = 0V, TJ = 70C --- -100 nA VGS = -12V --- 100 VGS = 12V 49 74 ID = -9.5A 9.3 14 nC VDS = -10V 22 32 VGS = -5.0V 26 --- VDD = -10V 540 --- ID = -9.5A ns 77 --- RD = 1.0 370 --- RG = 6.2 4530 6000 VGS = 0V 2400 --- pF VDS = -10V 2220 --- = 1.0kHz Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Min. Typ. Max. Units --- --- --- --- 43 35 -2.5 A -76 -1.2 65 52 V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = -2.5A, VGS = 0V TJ = 25C, IF = -2.5A di/dt = 100A/s D S Notes: Repetitive rating; pulse width limited by max. junction temperature. When mounted on 1 inch square copper board, t<10 sec Starting TJ = 25C, L = 1.3mH RG = 25, IAS = 9.5A. Pulse width 300s; duty cycle 2%. 2 www.irf.com IRF7233PBF 100 VGS - 7.5V - 5.0V - 4.0V - 3.5V - 3.0V - 2.5V - 2.0V BOTTOM - 1.5V TOP 100 -ID , Drain-to-Source Current (A) 80 -ID , Drain-to-Source Current (A) 20s PULSE WIDTH TJ = 25C 6 8 80 VGS - 7.5V - 5.0V - 4.0V - 3.5V - 3.0V - 2.5V - 2.0V BOTTOM - 1.5V TOP 60 60 40 40 20 20 0 0 2 4 -1.5V A 10 0 0 2 4 20s PULSE WIDTH -1.5V TJ = 150C 6 8 10 A -VDS , Drain-to-Source Voltage (V) -VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 2.0 TJ = 25C TJ = 150C RDS(on) , Drain-to-Source On Resistance (Normalized) ID = -9.5A -ID , Drain-to-Source Current (A) 1.5 10 1.0 0.5 1 1.0 1.5 2.0 VDS = -10V 20s PULSE WIDTH 2.5 3.0 A 0.0 -60 -40 -20 VGS = -4.5V 0 20 40 60 80 100 120 140 160 -VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRF7233PBF 6000 -VGS , Gate-to-Source Voltage (V) V GS = 0V, f = 1kHz Ciss = Cgs + Cgd , C SHORTED ds Crss = Cgd Coss = Cds + C gd 10 ID = -9.5A VDS =-10V 8 C, Capacitance (pF) 5000 Ciss 6 4000 4 3000 Coss Crss 2000 0 2 4 6 8 10 12 2 A 0 0 10 20 30 40 50 60 70 -VDS , Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 1000 -ISD , Reverse Drain Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) TJ = 150C TJ = 25C -ID , Drain Current (A) I 100 10 100us 10 1ms 1 0.0 1.0 2.0 VGS = 0V A 3.0 1 0.1 TA = 25 C TJ = 150 C Single Pulse 1 10 10ms 100 -VSD , Source-to-Drain Voltage (V) -VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRF7233PBF EAS , Single Pulse Avalanche Energy (mJ) 10.0 140 120 100 80 60 40 20 0 8.0 ID -4.2A -7.6A BOTTOM -9.5A TOP -ID , Drain Current (A) 6.0 4.0 2.0 0.0 25 50 75 100 125 150 25 TC , Case Temperature ( C) Starting TJ , Junction Temperature ( C) 50 75 100 125 150 Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10. Maximum Avalanche Energy Vs. Drain Current 100 Thermal Response (Z thJA ) D = 0.50 0.20 0.10 0.05 0.02 0.01 PDM t1 t2 SINGLE PULSE (THERMAL RESPONSE) 0.1 0.00001 0.0001 0.001 0.01 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJA + TA 0.1 1 10 10 1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 IRF7233PBF SO-8 Package Outline Dimensions are shown in milimeters (inches) D A 5 B DIM A b INCHES MIN .0532 .013 .0075 .189 .1497 MAX .0688 .0098 .020 .0098 .1968 .1574 MILLIMET ERS MIN 1.35 0.10 0.33 0.19 4.80 3.80 MAX 1.75 0.25 0.51 0.25 5.00 4.00 A1 .0040 6 E 8 7 6 5 H 0.25 [.010] A c D E e e1 H 1 2 3 4 .050 BASIC .025 BASIC .2284 .0099 .016 0 .2440 .0196 .050 8 1.27 BASIC 0.635 BAS IC 5.80 0.25 0.40 0 6.20 0.50 1.27 8 6X e K L y e1 A C 0.10 [.004] y K x 45 8X b 0.25 [.010] A1 CAB 8X L 7 8X c NOT ES : 1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994. 2. CONT ROLLING DIMENS ION: MILLIMET ER 3. DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. 4. OUT LINE CONFORMS T O JEDEC OUT LINE MS -012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUS IONS. MOLD PROT RUS IONS NOT T O EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUS IONS. MOLD PROT RUS IONS NOT T O EXCEED 0.25 [.010]. 7 DIMENS ION IS T HE LENGT H OF LEAD FOR S OLDERING T O A SUBS T RAT E. 3X 1.27 [.050] 6.46 [.255] FOOT PRINT 8X 0.72 [.028] 8X 1.78 [.070] SO-8 Part Marking Information (Lead-Free) EXAMPLE: T HIS IS AN IRF7101 (MOSFET ) DAT E CODE (YWW) P = DES IGNAT ES LEAD-FREE PRODUCT (OPTIONAL) Y = LAST DIGIT OF T HE YEAR WW = WEEK A = AS SEMBLY S IT E CODE LOT CODE PART NUMBER INT ERNAT IONAL RECT IFIER LOGO XXXX F 7101 6 www.irf.com IRF7233PBF SO-8 Tape and Reel Dimensions are shown in milimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.11/04 7 |
Price & Availability of IRF7233PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |